Caltech Secure Wireless
Caltech Secure is the main wireless network for campus. Sign in with your access.caltech username and password, and your device connects automatically in any building that has coverage.
Features
- Encrypted connection
- Automatic roaming as you move between buildings
- Works with your existing access.caltech credentials, so there is nothing new to remember
| Who can use it | Cost |
|---|---|
| Anyone with active access.caltech credentials, including faculty, staff, students, postdocs, and visitors approved through Human Resources | Free |
Before you connect
The first time you connect, your device will ask you to trust a security certificate. Check that the server name reads cp1.caltech.edu, then accept. If the name is different, do not continue and contact the Help Desk. IMSS renews this certificate every quarter, so you may see the prompt again from time to time. That is expected.
How to Connect
- Select the Wi-Fi icon on the taskbar.
- Choose Caltech Secure, then select Connect.
- Enter your access.caltech username and password, then select OK.
- If asked about the certificate, confirm the server name is cp1.caltech.edu, then select Connect.
- Select the Wi-Fi icon in the menu bar.
- Choose Caltech Secure.
- Enter your access.caltech username and password, then select Join.
- When the certificate prompt appears, confirm the server name is cp1.caltech.edu, then select Continue. macOS may ask for your computer password to finish.
- Open Settings and tap Wi-Fi.
- Tap Caltech Secure.
- Enter your access.caltech username and password, then tap Join.
- Confirm the server name is cp1.caltech.edu, then tap Trust.
- Open Settings, then Network & internet, then Wi-Fi.
- Tap Caltech Secure.
- Set EAP method to PEAP and Phase 2 authentication to MSCHAPv2.
- Set CA certificate to Use system certificates and Domain to caltech.edu.
- Enter your access.caltech username and password, then tap Connect.
- Select the clock area, then the Wi-Fi icon, then Caltech Secure.
- Set EAP method to PEAP and Phase 2 authentication to MSCHAPv2.
- Set Server CA certificate to Default and Domain to caltech.edu.
- Enter your access.caltech username and password, then select Connect.
- Open your network settings and select Caltech Secure.
- Set Security to WPA & WPA2 Enterprise and Authentication to Protected EAP (PEAP).
- Leave Anonymous identity blank. Set Inner authentication to MSCHAPv2.
- Use the system CA certificates and set Domain to caltech.edu.
- Enter your access.caltech username and password, then select Connect.
Need Help?
If you still cannot connect, contact the IMSS Help Desk
Online: ServiceNow
Phone: 626.395.3500
Email: [email protected]
Remote Help: TeamViewer
In-Person: 367 S. Holliston Avenue
Room 204 (Bldg. 85)
Hours: Monday - Friday, 8AM - 5PM
You can also try the Wireless Troubleshooting page.