How to Connect on Android
Instructions to connect to Caltech Visitor wireless network using Anyroam.net
IMPORTANT: If you already have eduroam access, please DO NOT USE Caltech Visitor. Connect directly to the EDUROAM network using your own institution credentials.
FIRST INSTALL "CLOUDPATH" APP
1.Download the Cloudpath app from the Play Store. Search for "Cloudpath" and click the "Install" button, as shown below. DO NOT click "Open".
NEXT STEPS FOR WI-FI CONNECTION
2.Go to Wi-Fi listings. Under Available Networks, select "Caltech Visitor".
3.On the Caltech Wireless Network Login page that appears, click on the link that says "Need an account? Click Here". Do not enter a Username or Password.
4.On the next page titled "Wireless Network Self Registration", click on the "Anyroam.net" link at the bottom of the page
5.Click Continue on the "Welcome to Anyroam" page
6.Read and Agree to Terms of Service, and click Start
7.Enter your cell phone number, including area code, to receive a verification code via SMS Message. If you do not receive an SMS message please contact the Caltech Help Desk for further assistance.
8.Enter Verification Code you received and click Continue.
9.When prompted at the next screen, click on the grey box titled "Install The Network".
10.On the next screen, click on "Continue Anyway Via Browser".
11.The Cloudpath App is now ready to connect with Wi-Fi authentication. You will need to repeat steps 3, 4, and 9.
12.Follow the prompts to complete the Cloudpath installation. Note that if you see the picture below with a red X, you will need to change default apps. Instructions to change default apps can be found here.
13.Click Next on the following screen, shown below:
14.After installation completes, Cloudpath will request to access your device's location. This choice is up to you.
15.You should now see the following:
16.When prompted, allow Cloudpath to save the "eduroam" network to your phone
17.Installation and configuration is complete! Now when you need to connect to the Caltech wireless network, please connect using "eduroam". If asked to select a certificate for network "eduroam", choose the @anyroam.net option and click OK to connect.